Test Results
Wear Test

Test Conditions
- Spindle Speed: 6900rpm
- Reed Per Tooth: 0.05mm / tooth
- Radial Depth of Cut: 0.18mm
- Axial Depth of Cut: 6mm
- Material: SKD11 HRC 60
Dia 6 * 50 2-Flutes Sueare
Coating: AlTiN
Coating: AlTiN

Test Conditions
- Spindle Speed: 10000rpm
- Reed Per Tooth: 0.16mm / tooth
- Radial Depth of Cut: 0.3mm
- Axial Depth of Cut: 6mm
- Material: SKD11 HRC 60
Dia 6 * 50- 2-Flutes Ball Type
Coating: AlTiN
Coating: AlTiN
Result If Wear Test (Before vs After)
P Company
-
Before
-
After (220m)
-
Before
-
After (220m)
CCT A
-
Before
-
After (220m)
-
Before
-
After (220m)
CCT B
-
Before
-
After (220m)
-
Before
-
After (220m)
Test Conditions
- Spindle Speed: 21000rpm
- Reed Per Tooth: 0.12mm / tooth
- Radial Depth of Cut: 0.3mm
- Axial Depth of Cut: 17mm
- Material: SKD61 HRC 55
Microstructure
-
CCT-A
-
CCT-B
-
CCT-C
Grade | Composition | Density | Hv30 | TRS | Microstructure (ISO 4505) |
|
---|---|---|---|---|---|---|
CCT A | 94 | 0.5 | 14.65 | 1970 | 3200 | A02B00C00 |
CCT B | 92 | 1 | 14.34 | 1900 | 3500 | A02B00C00 |
CCT C | 90 | 1.5 | 14.25 | 1780 | 3800 | A02B00C00 |
